For best results with our 36-inch DTF transfers, follow the exact settings below:
✅ First Press (Main Application)
-
Temperature: 300°F – 310°F
-
Time: 10–12 seconds
-
Pressure: Medium to Firm
-
Peel: HOT PEEL immediately right after lifting the press — do not let it cool
✅ Second Press (Required Finishing Press)
-
Place parchment paper, butcher paper, or Teflon sheet over the design
-
Temperature: 300°F – 305°F
-
Time: 5–7 seconds
-
Pressure: Medium
Important Pressing Tips
-
Pre-press the garment for 3–5 seconds to remove moisture and smooth the surface.
-
If peeling is not clean — increase pressure first, not heat.
-
Our transfers work on cotton, polyester, blends, fleece, hoodies, and more.
-
For budget-level heat presses (Amazon, non-US brands), set heat to 310°F – 315°F — many run lower than displayed.
-
Second press is mandatory for long-term wash resistance and professional finish.